In this post I’m going to show you how to start a fire with sticks and a string. When you start your first fire by rubbing two sticks together, you are going to be amazed. It’s an incredible experience. Even after starting thousands of fires this way, I’m still in awe every time I do it.
Making a bow drill kit from start to finish
Watch the video above on how to make a fire with sticks
The video here is excellent. I go over a lot of detail in the video and you need to watch it.
Here are some important points that aren’t obvious:
- When loading the spindle in the string, hold the spindle alongside the string at first, then twist it around the string.
- The initial placement of the spindle in the fireboard is critical. Make sure you go in about 3/4 the thickness of your spindle.
- Cut your notch just short of the middle of your circle.
- Make the side of your notch smooth. Otherwise the powder will get hung up on the jagged edges of the notch.
- Use your bow hand to make slight adjustments to the string and vary the tightness.
Primitive fire starting is all about using friction to create heat. You need to get most woods about 750-800 degrees before they will smolder. What you do with friction fires is spin or rub two sticks together, build up a little pile of powdered wood, and once that powder gets to 750 degrees, it forms an ember (or coal).
You then put the coal into a tinder bundle and blow it into flame. Getting fine, bone-dry tinder is really important when picking out your tinder bundle material. (Here’s a video on finding tinder bundle material in the desert.) The coal is very similar to the end of a burning cigarette, and you can practice igniting tinder bundles using cigarettes.
Parts to a bow drill kit and a hand drill kit
The Bow Drill Kit
Probably the easiest way to start a friction fire at home when you have lots of time and materials is using a bow drill. A bow drill kit has 5 pieces to it. You’ll need:
- A bow
- A string
- A hand hold
- A spindle and
- A fireboard.
In reality, finding all five pieces in the wilderness can be difficult. That’s why I prefer…
The Hand Drill Kit
In a real survival situation the hand drill will probably be your first choice since you only need two sticks:
- A spindle and
- A fireboard.
But, since I’m assuming you are going to start out practicing when your life doesn’t depend on success, I’m going to begin with the bow drill fire. If you want to get a bow drill kit from me, let me know and I’ll sell you one.
Technique when first learning to how to start a fire with sticks
Technique is huge when starting a fire with a bow drill. First of all, I’d suggest reviewing the beginning of video on this page and again at 12:35 so you can see how I’m positioned.
As you re-watch the video, note the following things, because they are really important:
- The hand that holds the handhold is locked against my shin at the wrist. This keeps the spindle steady in the socket.
- My body is directly over the spindle. This allows me to put pressure down by leaning down with my body and not pushing down with my arm.
- I use as much of the bow as possible, going from end to end. This creates more heat.
- The arm that holds the bow stays pretty much in the same position throughout each stroke. Keep the bow straight and level by adjusting the angle of the wrist holding the bow. If you do this right, the string will stay pretty much in the same place on the spindle during each bow stroke.
- The foot holding the fireboard is bare. Being barefoot is important because you want to be able to feel what is going on with your fireboard. You have to adjust for wobbling and keep it steady.
Those are the key factors when you are first learning how to make a fire with sticks. It’s going to take some practice though. It took me over 1 1/2 years to get a coal. Just stick with it.
And of course, if you have any questions about how to start a fire with sticks, either email me or use the contact form and I’ll help you out.
For all my posts on fire, go to the “How to Make a Fire” page.